Drivo / Settings

Moderators: Elite Admin S, Elite Admin M

Posts: 10
Joined: Wed Aug 30, 2017 11:00 pm

Drivo / Settings

Postby SHrider » Thu Aug 31, 2017 9:09 am

Hi ,

yesterday i got my new Drivo, its my first Elite trainer so i have some problems do unterstand the settings.

What means circumference in REAL software / Bike profile? Doas it means the the wheels size? If yes-why i have to do this setup-because i havent a back wheels with Drivo.

I also paired the Drive with my Garmin Edge520. If i open the sensor settings form Drivo at the Garmin Edge520 / area "Sensor Details" i also can type in the wheels size. Is it important to type in a wheels size in the Edge 520 to get accurate speed values or are this setting directly at the Edge520 unimportant?

At the Edge 520 / Sensor Details i also can type in the bike weight - its important to type in the weight from the bike or not? If important which weight i should take? Weight within back wheel or weight without back wheel?


Posts: 2
Joined: Thu Oct 12, 2017 11:27 am

Re: Drivo / Settings

Postby robert.nejedly » Thu Oct 12, 2017 11:32 am

Hi, I have a similar issue with my new Kura 2018 and Garmin fenix 3. In sensor details it want wheel size. My standard value (2000+) shows speed over 50km/h at 100Watts..:(
Please, what is the correct wheel size for Fenix 3, probably for Garmin generally?
Thank you

User avatar
Elite Admin S
Posts: 1574
Joined: Tue Nov 08, 2016 10:18 am

Re: Drivo / Settings

Postby Elite Admin S » Thu Oct 12, 2017 11:36 am

Hi Robert

For Kura, you have to insert your wheel circumference / 3.43 (for example, if your wheel measures 2100mm, you have to insert 612mm)

Here's the complete table:
https://drive.google.com/open?id=0By4rZ ... 2kwUC1tUzg

Posts: 2
Joined: Thu Oct 12, 2017 11:27 am

Re: Drivo / Settings

Postby robert.nejedly » Thu Oct 12, 2017 11:47 am

Thank you!

Posts: 3
Joined: Mon Feb 11, 2019 11:17 pm

Re: Drivo / Settings

Postby bucometa » Thu Feb 14, 2019 1:32 pm

Hello, I inform you that you must enter the length of the wheel of your bike in the advanced configuration of My-Etraining and in the Garmin you must put that same length of your wheel divided by 3.43.

Posts: 2
Joined: Wed Mar 27, 2019 12:06 pm

Re: Drivo / Settings

Postby nickcw » Wed Mar 27, 2019 12:09 pm

Does the wheel diameter setting in the Elite app effect the power outputs on Zwift?

The Drivo does seem much to require much more effort to ride at 250 watts that my real bike with a Quark power meter.

Its seems to be more than Calibration as it seems to be about 40 watts out


Return to “Drivo & Drivo II”

Who is online

Users browsing this forum: No registered users and 1 guest