Resistance Issue on Elite Suito

Kura, Turbo Muin Smart B+, Qubo Power Smart B+...

Moderators: Elite Admin M, Elite Admin S

kaushik.keshav
Posts: 2
Joined: Thu Jul 30, 2020 8:31 am

Resistance Issue on Elite Suito

Postby kaushik.keshav » Thu Jul 30, 2020 8:36 am

Hi,

I am noob in indoor training environment but have been riding outdoors since an year and half. Recently, I have procured Suito from Elite to keep my passion in Cycling alive. Right from the very first day, I have observed that the resistance on the trainer is very hard. Even if I am riding on flats, the pedal push is like I am on climb. Whenever, I am climbing at 4%, I feel fatigued and stressed.

I have observed that the resistance is unpredictable and Suito decides all of a sudden that it needs to ride hard. I am actually not enjoying my rides due to the missing smoothness while I am riding indoors :( :x

timo.gieb
Posts: 1
Joined: Thu Jul 30, 2020 9:54 am

Re: Resistance Issue on Elite Suito

Postby timo.gieb » Thu Jul 30, 2020 9:57 am

Hi, how are you using the Suito, i.e. which app are using? Suito has to be controlled by an app to set the power.

I have smilar issues using zwift in the Free ride mode (ERG off). The suito just keeps on cranking up the resistance as I triy to increase cadence to 70-80 ( Watts are then > 400 I would have to push) , making it impossible for me to to train.
Firmware is up to date, linked to Zwift via BT.

Any Ideas any one?

Best, Timo

User avatar
Elite Admin S
Posts: 1885
Joined: Tue Nov 08, 2016 10:18 am

Re: Resistance Issue on Elite Suito

Postby Elite Admin S » Thu Jul 30, 2020 1:00 pm

Hi

First of all, do a calibration.
Remember to do a 10 minutes training at around 20 km/h (100-150W) before running the calibration.

If still you are having the feeling that simulation is not realistic, please contact our customer care at myetraining@elite-it.com.

Regards

kaushik.keshav
Posts: 2
Joined: Thu Jul 30, 2020 8:31 am

Re: Resistance Issue on Elite Suito

Postby kaushik.keshav » Thu Jul 30, 2020 3:26 pm

Hi,

I am using Zwift for training and for the Calibration, I have tried both Zwift and Elite app but still I feel that the tension is very tough. Even if ERG is off, the trainer becomes too tight to push even on flats. I tried Elite training app and my spin down calibration first was 11045 and then again 11035. I do not know, what is the issue and what do I do with these codes.

User avatar
Elite Admin S
Posts: 1885
Joined: Tue Nov 08, 2016 10:18 am

Re: Resistance Issue on Elite Suito

Postby Elite Admin S » Mon Aug 03, 2020 9:22 am

Please contact the customer care, it's necessary to investigate further

Regards


Return to “Smart Trainers”

Who is online

Users browsing this forum: No registered users and 0 guests