Arion Digital smart - loud knocking sound in the front roll

Moderators: Elite Admin S, Elite Admin M

ZBonifaciy
Posts: 1
Joined: Tue Dec 11, 2018 9:52 pm

Arion Digital smart - loud knocking sound in the front roll

Postby ZBonifaciy » Fri May 10, 2019 8:37 pm

Hello.
I have a problem with the roller Arion Digital Smart (purchased in May 2017).
During torsion,There is a loud knocking sound in the front roll (red cylinder, on which the bike rolls).
The bearings are absolutely unbroken, but it seems that the place where the bearing is lockated into the roll has become loose, it moves from side to side and makes knocking sounds.

The question is the following: can I buy a red cylinder (roll) only (at least the front one) for the roller Arion Digital Smart.

Some time before, they were in sale on your web-site, but now I can not find them.

jim802
Posts: 10
Joined: Thu Jun 18, 2020 4:53 pm

Re: Arion Digital smart - loud knocking sound in the front roll

Postby jim802 » Tue Jun 23, 2020 3:01 pm

You can buy them, but before you do, I would advise removing the roller and disassembling it to see exactly what the issue is.

jim802
Posts: 10
Joined: Thu Jun 18, 2020 4:53 pm

Re: Arion Digital smart - loud knocking sound in the front roll

Postby jim802 » Tue Jun 23, 2020 3:03 pm

This is exactly what you want but out of stock

https://www.shopelite-it.com/en/spare-p ... ag-rollers

Other than the sticker, this is identical and will work perfectly too

https://www.shopelite-it.com/en/spare-p ... mag-roller


Return to “Arion Digital”

Who is online

Users browsing this forum: No registered users and 0 guests