Any chance to get Magene.cn Cadence sensor work properly ?
It connects and its sending dat to my training app if cadence higher than 30... but main problem is if you stop pedaling value no set to 0 but it stays at last displayed value (38 or 72 ... ecet)..
Is this sensor or app problem ?
Cadence
Moderators: Elite Admin M, Elite Admin S
- Elite Admin S
- Posts: 2776
- Joined: Tue Nov 08, 2016 10:18 am
Re: Cadence
Hi
Which transmission protocol does this sensor use? Is it ant+ or bluetooth smart?
Regards
Which transmission protocol does this sensor use? Is it ant+ or bluetooth smart?
Regards
-
- Posts: 1
- Joined: Thu Nov 30, 2017 12:00 pm
Re: Cadence
Hi,
I have similar problem. I have a Garmin peddle sensor (ant+) that is detected during the parameter set up on my android phone. The myetraining app returns data during peddling from the misuro sensor on the turbo itself, it returns Hr data but it appears that the cadence data is not being picked up and it just shows 0.
Any suggestions?
Thanks
Rich
I have similar problem. I have a Garmin peddle sensor (ant+) that is detected during the parameter set up on my android phone. The myetraining app returns data during peddling from the misuro sensor on the turbo itself, it returns Hr data but it appears that the cadence data is not being picked up and it just shows 0.
Any suggestions?
Thanks
Rich
- Elite Admin S
- Posts: 2776
- Joined: Tue Nov 08, 2016 10:18 am
Re: Cadence
Are you sure that your phone supports the ant+ communication?
If not, you'll have to use a ant+ dongle
Regards
If not, you'll have to use a ant+ dongle
Regards
Who is online
Users browsing this forum: No registered users and 11 guests