Direto w/ 11 speed Ultegra

Drivo, Rampa, RealTour, RealAxiom, RealPower, Real Turbo Muin, Qubo Digital Smart B+

Moderators: Elite Admin S, Elite Admin M

bmac1466
Posts: 1
Joined: Tue May 01, 2018 5:42 pm

Direto w/ 11 speed Ultegra

Postby bmac1466 » Tue May 01, 2018 6:01 pm

Hello,

I bought a Direto back in March, and I use an 11-speed Ultegra cassette (11-28T, same as my road bike). According to the manual and various posts online covering the Direto, I installed the cassette without any spacers.

However, earlier today I was going to take off the cassette to give it a thorough cleaning, and I noticed that I was able to move the cassette a bit along the hub; I can move it about 2-3mm along the hub, but the cassette is firmly held together.

I have experienced, while only a few times, that the chain sometimes skips during a training session. Now I am thinking this is because the cassette is not correctly installed.

Have I installed it improperly? Could/should I need to use the included spacers after all?

User avatar
Elite Admin S
Posts: 1018
Joined: Tue Nov 08, 2016 10:18 am

Re: Direto w/ 11 speed Ultegra

Postby Elite Admin S » Wed May 02, 2018 9:22 am

Hi

Usually 11-speed cassette doesn't require any spacer, but it also depends on the model.
In your case, it could be necessary to add a spacer (the cassette must be fixed without any play)
Try it and let us know if the problem on the chain is solved.


Return to “Interactive Trainers”

Who is online

Users browsing this forum: No registered users and 0 guests