Drivo rocker plate

Moderators: Elite Admin S, Elite Admin M

raino.annala@gmail.com
Posts: 3
Joined: Thu Nov 01, 2018 10:19 am
Contact:

Drivo rocker plate

Postby raino.annala@gmail.com » Wed Nov 14, 2018 8:24 am

Anybody built a rocker plate for Drivo?

sebrios
Posts: 29
Joined: Sat Nov 18, 2017 2:03 pm

Re: Drivo rocker plate

Postby sebrios » Tue Nov 27, 2018 2:25 pm

I did. Makes ALOT of difference. super super easy to do... just make sure to put the shaft sided, as the weigh of the flywheel makes it unbalanced.

lellinoaereoplanino
Posts: 20
Joined: Sat Jun 09, 2018 6:18 pm

Re: Drivo rocker plate

Postby lellinoaereoplanino » Tue Nov 27, 2018 4:26 pm

do you have photos?

sebrios
Posts: 29
Joined: Sat Nov 18, 2017 2:03 pm

Re: Drivo rocker plate

Postby sebrios » Wed Nov 28, 2018 4:47 pm

Sure do man... here are a few. Let me know if you need more info..

total cost... around USD40 or 50
Image
Image
Image

lellinoaereoplanino
Posts: 20
Joined: Sat Jun 09, 2018 6:18 pm

Re: Drivo rocker plate

Postby lellinoaereoplanino » Thu Nov 29, 2018 11:46 am

wooow :D :D :D :D :D

raino.annala@gmail.com
Posts: 3
Joined: Thu Nov 01, 2018 10:19 am
Contact:

Re: Drivo rocker plate

Postby raino.annala@gmail.com » Fri Nov 30, 2018 11:27 am

The image site is giving security warnings so pics may not be visible for everybody, but what I gather is what you needed was simply:

* hhb p204 bearing housings x 8
* axle (size and length?) x 1
* Plywood x 2
* pointy blue air cushion things? x 2
* some bolts and nuts

It seems the shaft is not directly in the middle of the plywood. Is that to stabilize the setup as the Drivo is not symmetric? What did you use to secure the trainer to the rocker?

sebrios
Posts: 29
Joined: Sat Nov 18, 2017 2:03 pm

Re: Drivo rocker plate

Postby sebrios » Fri Dec 07, 2018 2:08 pm

these are the parts I used:
5 x pillow bearings 3/4 (search on amazon) .. you can easily use only 4. I noticed the one in the middle does nothing..
10 x screws (2 per bearing)
31inch long steel shaft (3/4")
2 pieces of random wood (I used mdf as it was the cheapest)
2 Half Massage Balls

You need to place the shaft a little bit aside, because drivos center-weight is basically where the 2 plastic shells join


hope it helps..

Mary215
Posts: 1
Joined: Wed Nov 14, 2018 6:32 am

Re: Drivo rocker plate

Postby Mary215 » Mon Jan 07, 2019 8:07 am

Has anybody built a rocker plate for Drivo? Any reason why I should not build one?


Return to “Drivo & Drivo II”

Who is online

Users browsing this forum: No registered users and 2 guests