Kura auto risestance

Moderators: Elite Admin M, Elite Admin S

Karimsaleh99
Posts: 3
Joined: Tue Sep 26, 2017 5:04 pm

Kura auto risestance

Postby Karimsaleh99 » Tue Sep 26, 2017 5:20 pm

My kura is always on the highest resistance and it doesn't go down and i have to put 745 watt to reach 30km/h on myE training app

User avatar
Elite Admin S
Posts: 2771
Joined: Tue Nov 08, 2016 10:18 am

Re: Kura auto risestance

Postby Elite Admin S » Wed Sep 27, 2017 8:45 am

Hi


As you can see from the image below, the power curve of Kura grows up very quickly.
At 30km/h the power should be at around 450-500W, but at 35km/h it is already at 700-800W.

Image

So, are you sure you were at 30km/h and not a little more?
If you're sure of it, can you tell me if you feel some slipping or if you hear some strange noise?

A good test to do is this:
- do a 10 minutes warm up
- open the advanced settings in the app and select calibration
- complete the calibration procedure
- do again a training and try to keep your speed costantly at 20km/h

Please let me know the power you develop at that speed.

Regards

Karimsaleh99
Posts: 3
Joined: Tue Sep 26, 2017 5:04 pm

Re: Kura auto risestance

Postby Karimsaleh99 » Wed Sep 27, 2017 2:21 pm

I devolved around 160 watt at 20km/h

User avatar
Elite Admin S
Posts: 2771
Joined: Tue Nov 08, 2016 10:18 am

Re: Kura auto risestance

Postby Elite Admin S » Thu Sep 28, 2017 8:13 am

That seems correct

Karimsaleh99
Posts: 3
Joined: Tue Sep 26, 2017 5:04 pm

Re: Kura auto risestance

Postby Karimsaleh99 » Fri Sep 29, 2017 1:02 am

After calibration it seems good and correct .. thanks for your help


Return to “Kura”

Who is online

Users browsing this forum: No registered users and 2 guests