Official Forum

Hi,

Turbo Muin
Misuro B+ S/N 16436 (3 flashing lights)

I have been using successfully since January and recently started experiencing dropped power readings.
I replaced the 2032 battery. Power readings are now very low (40-50w at 90+ cadence, normally 140-160w). Readings do not drop.

I have tried to adjust belt tensioner with no change to the power reading.

Any idea what is wrong and how to possible correct this?

Thanks

Hi

3 flashes is the setting for Turbo Muin with serial number from 10000 to 10469.
In your case, you have to set 2 flashes only (serial number from 10470 to 30000).

Regards