Elite Drivo 2 position on rocker

Moderators: Elite Admin M, Elite Admin S

phil.leschnik
Posts: 1
Joined: Mon May 02, 2022 6:31 am

Elite Drivo 2 position on rocker

Postby phil.leschnik » Thu May 12, 2022 8:53 am

Elite Drivo 2 position on rocker question, can anyone help out? my rocker base will be 900mm wide, do I position my trainer on the centreline, or offset - see the photos below for where the approx centreline on the BB is and where the centerline is on the trainer. And disregard the cleanliness of the bike, it's my commuter, which will be used on the trainer.

First photo - center of bottom bracket
Second photo - centre of traner fron foot

And my training matt has lost most of the printed pattern, only about a year old - not a good advert for the supplier.
Attachments
280153617_1360288924480848_216061377833595226_n.jpg
280153617_1360288924480848_216061377833595226_n.jpg (35.6 KiB) Viewed 8204 times
279950051_1033140424285345_654670603365303035_n.jpg
279950051_1033140424285345_654670603365303035_n.jpg (35.45 KiB) Viewed 8204 times

jon.dunsdon
Posts: 4
Joined: Tue Apr 21, 2020 5:47 pm

Re: Elite Drivo 2 position on rocker

Postby jon.dunsdon » Fri Jun 10, 2022 4:58 pm

I positioned it on the middle of the bottom bracket - you want your weight to be centered on the rocker plate.

If the slight weight imbalance when you’re not on the bike bothers you (I did for me) then you can add a couple of kg’s to the right side of the rocker to balance out the drivo flywheel weight.


Return to “Drivo & Drivo II”

Who is online

Users browsing this forum: No registered users and 12 guests