Direto, no resistance for gear indexing

Moderators: Elite Admin S, Elite Admin M

ftalat
Posts: 5
Joined: Wed May 23, 2018 9:21 am

Direto, no resistance for gear indexing

Postby ftalat » Wed May 23, 2018 9:25 am

Is there any way to reduce or eliminate trainer resistance for gear indexing? Currently, it's hard to hand-pedal while indexing/adjusting the gears.

User avatar
Elite Admin S
Posts: 1088
Joined: Tue Nov 08, 2016 10:18 am

Re: Direto, no resistance for gear indexing

Postby Elite Admin S » Wed May 23, 2018 9:35 am

Hi

Explanation :geek:

When you plug the power supply, Direto places itself to what we call "default starting point".
This position has a little resistance (it's not a 0 resitance position). It is needed in case a user wants to use the trainer without any device, so he can still pedal on it without spinning around.

When you connect a device, instead, it places itself to the zero position (with no resistance).

So, to have minimum resistance when indexing the gear, this is what you have to do:
1. power on the trainer - it will go to the default starting point
2. connect it to a device (smartphone, tablet, pc...) - resistance will be put to zero
3. disconnect the power supply or keep it connected to the app while doing the indexing

8-)

ftalat
Posts: 5
Joined: Wed May 23, 2018 9:21 am

Re: Direto, no resistance for gear indexing

Postby ftalat » Wed May 23, 2018 2:39 pm

Thanks, I'll try this later today.


Return to “Direto”

Who is online

Users browsing this forum: No registered users and 2 guests