I have a Direto X that I have been using regularly for the past 2 years. It started making a strange whining noise so I removed the cover and did some trouble shooting. One of the first things I checked was the drive belt pulley on the flywheel. It was fine, but I found that one of the 5 screws on the flywheel assembly was loose, so it tightened it (the remaining screws were okay). I put everything back together, but in doing so I put a tear in the drive belt. The tear is parallel the the belt ribs, so I put it back on anyway to see if the trainer would work. The good news is that the noise has gone away, but I ran into some problems. I attempted to perform a calibration using the My ETraining software, but the calibration app will not return a calibration value. It just returns an error message instead. I then tried calibrating the trainer using Zwift, which was successful. Now I find that the trainer is extremely difficult to pedal (very high resistance). I cannot perform another calibration because the resistance is so high it is impossible to accelerate past 25 km/hour!
Questions:
- Can I restore the trainer to factory defaults? If not, how can I lower the resistance enough to be able to recalibrate (and achieve 31 km/hour)?
- Your estore shows the drive belt is not in stock. When will it become available?
Please help! I miss my trainer!
Regards,
Brian
Direto x: Cannot Calibrate
Moderators: Elite Admin M, Elite Admin S
-
- Posts: 2
- Joined: Wed Jan 31, 2024 3:17 am
Re: Direto x: Cannot Calibrate
Note: I just created a support ticket for this.
- Elite Admin S
- Posts: 2776
- Joined: Tue Nov 08, 2016 10:18 am
Re: Direto x: Cannot Calibrate
Hi
It was a good idea to open a ticket to the support with this kind of issue.
I'm sure the guys there will help you solve the problem quickly
It was a good idea to open a ticket to the support with this kind of issue.
I'm sure the guys there will help you solve the problem quickly
Return to “Direto, Direto X, Direto XR”
Who is online
Users browsing this forum: No registered users and 11 guests