Elite Direto Firmware and Turn off

Moderators: Elite Admin M, Elite Admin S

jose84
Posts: 6
Joined: Fri Oct 20, 2017 11:10 pm

Elite Direto Firmware and Turn off

Postby jose84 » Fri Oct 20, 2017 11:13 pm

Hello
I just recieved my new Direto and maybe I have two stupid questions:
1. No where in the documentation I found anything about something simple as Turn off, It says goes to "Sleep mode" but nothing else, is just a simple unplug from the electrical/enery wall plug?
2. How I can check that I have the latest version of firmware on my trainer?
Thanks
J.

User avatar
Elite Admin S
Posts: 1930
Joined: Tue Nov 08, 2016 10:18 am

Re: Elite Direto Firmware and Turn off

Postby Elite Admin S » Tue Oct 24, 2017 11:34 am

Hi

Direto doesn't have a switch to turn it off. You can decide if wait the stand-by mode or unplug it (best solution to avoid storm damages).
About the firmware, by now there is only one firmware for Direto so... you have the last one! ;)

By the way, in the future we will release an app that will check the firmware status of the trainer and eventually upgrade it.

Regards

jose84
Posts: 6
Joined: Fri Oct 20, 2017 11:10 pm

Re: Elite Direto Firmware and Turn off

Postby jose84 » Tue Oct 24, 2017 2:01 pm

Hello
Many thanks for the reply, actually I fond out that the Direto after a while of no use will shutdown itself. Also, thanks for the info about the firmware.
Now, I got another issue, I have my Garmin Edge 810 and I would like to pair manually the Direto since I got another Power meter next to it, where I can find this ID?
Thanks
J.

User avatar
Elite Admin S
Posts: 1930
Joined: Tue Nov 08, 2016 10:18 am

Re: Elite Direto Firmware and Turn off

Postby Elite Admin S » Thu Oct 26, 2017 10:44 am

Hi J.

Garmin Edge 810 doesn't support the fe-c trainers. You can connect to it only as a speed&cadence sensor + power sensor.
I don't know if this is the information you need.

Regards

jose84
Posts: 6
Joined: Fri Oct 20, 2017 11:10 pm

Re: Elite Direto Firmware and Turn off

Postby jose84 » Thu Oct 26, 2017 10:50 am

Hello
I found the ID for connecting manually to my Garmin 810, you need to take the cover of the leds and you'll dine the ID tag.
Thanks!


Return to “Direto & Direto X”

Who is online

Users browsing this forum: No registered users and 9 guests