Direto calibration

Moderators: Elite Admin S, Elite Admin M

Posts: 13
Joined: Fri Mar 24, 2017 9:28 am

Re: Direto calibration

Postby fuego.bluedane » Fri Sep 20, 2019 8:32 pm

elite wrote:Isn't Ok. Max difference is 5 points. You should do calibration https://www.youtube.com/watch?v=LLrK-5J ... dex=3&t=0s

The video of calibration is unavailable?
If my offset is lower more than 5 points than offset from sticker what should i do?

Posts: 5
Joined: Tue Apr 25, 2017 9:00 pm

Re: Direto calibration

Postby marconazzi » Mon Nov 04, 2019 1:54 pm

Even on Direto X you have to follow the same calibrations? and if you use it on erg mode but with Quarq PM, it is still needed?

Posts: 3
Joined: Fri Nov 08, 2019 8:54 am

Re: Direto calibration

Postby daniele.testa1979 » Fri Nov 08, 2019 11:25 am

Hi, using Garmin 820, I have some questions:

1) How can I calibrate the Elite direto?

2) How can I define the circumference of the wheel?

3) Erg mode is an automatic function? If I set an interval 240 - 260 watt for 5 min., the direto keep this power?

Posts: 14
Joined: Wed Dec 04, 2019 11:00 pm

Re: Direto calibration

Postby flimps » Wed Dec 04, 2019 11:09 pm

Mine shows a circumference of 2070 and is showing. 10-20 watts above what vercto 3, stages and 4iii show.
Any suggestion to have drivo 2 showing the correct power?

Posts: 1
Joined: Mon Sep 11, 2017 3:09 pm

Re: Direto calibration

Postby hector157 » Mon Aug 03, 2020 5:25 am

Trying figure my calibration offset value was 6379 is this correct

Posts: 5
Joined: Sat May 16, 2020 12:19 pm

Re: Direto calibration

Postby heiko » Sat Aug 08, 2020 12:09 pm

according to Elite support (19.07.2020) there is no strict limit:

"A difference of +/- 7/8 points is completely normal unless you don't notice something wrong with your trainer.
I suggest you to keep using your trainer without any worries and to contact us if you notice some problems with your Direto."

Posts: 1
Joined: Thu Aug 13, 2020 1:37 pm

Re: Direto calibration

Postby nicholas.anthonythomas » Thu Aug 13, 2020 1:41 pm

My Direto X has gone crazy in the last 2 weeks. Worked perfectly for 4 months.
First the spin down calibration was asking me to speed up to 54.6kph instead of the usual 20kph, would then spin down all the way to 0 and nothing would happen. It would always read 10-15 watts higher than 4iii and vector 3's
This afternoon i went through the same issues on Trainerroad but it somehow had a successful calibration in less than 1 second of spindown but was reading 50watts higher than my vector 3 pedals for a steady state recovery ride.

Anyone have any ideas on whats going on?

Return to “Direto, Direto X, Direto XR”

Who is online

Users browsing this forum: No registered users and 11 guests