Calibration failed

Moderators: Elite Admin S, Elite Admin M

bergenzaun
Posts: 1
Joined: Tue Mar 24, 2020 10:21 am

Calibration failed

Postby bergenzaun » Tue Mar 24, 2020 10:26 am

Hi,
Trying to calibrate, following all steps (incl 10 min warmup), but only receive ’Calibration failed’.
What to do? Getting more and more frustrated.
Attachments
ABC77E8C-8FF2-4CD9-A9BB-70343C8F8A83.jpeg
ABC77E8C-8FF2-4CD9-A9BB-70343C8F8A83.jpeg (21.47 KiB) Viewed 352 times

mastercaution
Posts: 1
Joined: Wed Mar 25, 2020 11:46 am

Re: Calibration failed

Postby mastercaution » Wed Mar 25, 2020 12:00 pm

Hello,

I had the same issue.
After searching in the Knowledge Base offered by Elite I found the following procedure, NOT specified in the official Instruction manual, but in my case it was successful:

- the warm-up of the trainer must be done for 10 minutes at power levels of about 100 and 150W;
- after launching the calibration in the app you must reach and keep a speed of about 25 kmh (not shown in the app itself, you have to use another device);
- should'nt the calibration be successful in 10 secs, you must cancel the calibration and repeat again. It is no use to insist.

Link: https://elitesrl.zendesk.com/hc/en-us/a ... a-Software

Hope to be helpful.

Ciao
Luca
Milano (Italy)

raphnou
Posts: 48
Joined: Wed Apr 11, 2018 9:23 am

Re: Calibration failed

Postby raphnou » Wed Mar 25, 2020 6:24 pm

Bonjour,

J'avais un Direto il y a 2 ans, la courroie a cassé, et j'avais aussi les problèmes d'étalonnages.
Je constate que c'est toujours pareil à lire le forum de temps en temps
Ce direto a une mauvaise conception, il ne sera pas fiable sur le long terme, j'ai préféré voir ailleurs, et maintenant plus aucun problème, mais il faut mettre 200€ de plus...

Bon courage à tous


Return to “Direto”

Who is online

Users browsing this forum: No registered users and 4 guests