Hi guys
I'll do a little resume about Misuro issues.
If you have any issue with the misuro sensor:
1. check the setting of the misuro (number of flashes, position on the trainer and orientation)
2. check that it is properly powered up (check if it powers on when you press the button on the side of the battery, check battery level - remember that a low battery charge can make it switch on and be recognized by the app but don't transmit data)
3. check the setting in the app (check to have select the proper trainer and to have used the correct circumference number; if you use bluetooth, check if both bluetooth and position gps are enabled)
If all of the things above are ok, you can also do this test:
- take the misuro on one hand and a magnet on the other
- be sure that the misuro is on (press the button on the side of the battery holder)
- run my e-training and do the pairing
- if the pairing is possible, start a training (any type is ok, also level mode which is available even without subscription)
- pass very rapidly the magnet near the two notches on the show side of the misuro
- check if you can see any value on screen
If you don't see anything, the misuro may be malfunctioning (contact our customer care at
myetraining@elite-it.com)
If it works, the problem may be simple positioning
Regards