Page 1 of 1


Posted: Tue Oct 09, 2018 8:21 pm
by piotrowski.damian
What this function do:
- Power Meter Link
- Power smoothing

Thanks :)

Re: Settings

Posted: Wed Oct 10, 2018 8:45 am
by Elite Admin S
Power meter link

This function is available on Zumo only (by now) and allows having much more accurate power data.
This function allows Zumo to use a power sensor present on the bike as power source. This way, Zumo is more precise since the power data
measured by the sensor are more precise than those Zumo can calculate with its formulas.
Note: this function cannot be used if no power sensor is installed on the bike.

Power smoothing

Power smoothing is available for all the trainers that have an internal power sensor (Direto, Drivo, Drivo II, Kura).
It manage how much smoothed the power value is.
As these trainers are very precise in reading power, the value you'll see on screen will oscillate continuously (in fact, it's normal to have variations between the pedal strokes). Some users prefer to have a more stable visualization of power, so we have added this option.
The higher the value, the more "averaged" will be the power.

Re: Settings

Posted: Tue Nov 27, 2018 8:41 pm
by stephangrobin
Does power smoothing change how the trainer reacts or just how it is displayed on the graph?

Re: Settings

Posted: Thu Dec 27, 2018 9:42 am
by TheRealGioberti
Hi there,

My Direto default value is 2 for this setting. What is the valid range for this option?

Thanks in advance.

Re: Settings

Posted: Sun Feb 03, 2019 6:01 pm
by scoob
When I click on this option for my Drivo II it comes back with a 2.
Like the other thread - surprised no reply from admire to the question - does this affect how the trainer reacts ?