Shift Lever not working

Turno, Kura, Turbo Muin Smart B+, Qubo Power Mag Smart B+

Moderators: Elite Admin M, Elite Admin S

fabriciomacedopb
Posts: 1
Joined: Wed Apr 01, 2020 12:32 pm

Shift Lever not working

Postby fabriciomacedopb » Wed Apr 01, 2020 12:33 pm

Hello, I have a Qubo power Mag smart +. The shift Lever is not working. I bought the product in 2017 is out of warranty and I have no authorized center probably 2000 km from my city. Can you send a disassembly and assembly guide for the shift Lever?

cse256
Posts: 2
Joined: Tue Apr 07, 2020 5:34 pm

Re: Shift Lever not working

Postby cse256 » Tue Apr 07, 2020 5:35 pm

I have the same problem

cse256
Posts: 2
Joined: Tue Apr 07, 2020 5:34 pm

Re: Shift Lever not working

Postby cse256 » Tue Apr 07, 2020 7:01 pm

In my case, the little stop near the screwdriver doesn’t work properly on the little cilindrial spring, unfortenately I dissambly all the knob, with it’s epicicloidal mechanism and and the big round spring, now I m trying to mount in the correct way, may be some wd 40 on the assembly would have work :shock:
Attachments
E7139C80-0EEC-4723-8FC1-0A078772E5FF.jpeg
E7139C80-0EEC-4723-8FC1-0A078772E5FF.jpeg (26.07 KiB) Viewed 14451 times

kindaliker
Posts: 1
Joined: Wed Jul 22, 2020 2:13 pm

Re: Shift Lever not working

Postby kindaliker » Thu Jul 23, 2020 12:27 pm

cse256 wrote:In my case, the little stop near the screwdriver doesn’t work properly on the little cilindrial spring, unfortenately I dissambly all the knob, with it’s epicicloidal mechanism and and research paper examples about it and the big round spring, now I m trying to mount in the correct way, may be some wd 40 on the assembly would have work :shock:


Good job from you. Did you fix it? wd 40 is working ok?

Sobamee
Posts: 3
Joined: Tue Nov 16, 2021 3:28 pm

Re: Shift Lever not working

Postby Sobamee » Fri Nov 19, 2021 8:18 pm

Did you guys found a way to fix it?

paxtonleiny
Posts: 5
Joined: Fri Jun 09, 2023 4:09 am

Re: Shift Lever not working

Postby paxtonleiny » Thu Jun 15, 2023 3:12 am

cse256 wrote:In my case, the little stop near the screwdriver doesn’t work properly on the little cilindrial spring, unfortenately I dissambly all the knob, with it’s epicicloidal mechanism and and the big round spring, now I m trying to mount in the correct way, may be some wd 40 on the assembly would have work :shock:

I applaud your efforts. Is it working now? The WD-40 is fine, right?

User avatar
Elite Admin S
Posts: 2771
Joined: Tue Nov 08, 2016 10:18 am

Re: Shift Lever not working

Postby Elite Admin S » Wed Jun 21, 2023 8:33 am

Hi guys

Please contact our support before disassemble a trainer.
We can give you instructions and tell you what you can do by yourself and what needs special equipment.

Here you can raise your ticket, we reply usually within 1 day:
https://support.elite-it.com/en/ticket

Regards


Return to “Smart Trainers”

Who is online

Users browsing this forum: No registered users and 9 guests