Qubo Digital Smart B+ sync with Garmin 935.

Moderators: Elite Admin M, Elite Admin S

gbizetas
Posts: 1
Joined: Mon Mar 26, 2018 11:32 pm

Qubo Digital Smart B+ sync with Garmin 935.

Postby gbizetas » Mon Mar 26, 2018 11:36 pm

Dear Elite

I have an Elite Qubo Digital Smart B+. When I connected my 935 to it via ANT+ I noticed that speed was completely off, showing me at up to 190km/h sometimes.

What shall i do?

User avatar
Elite Admin S
Posts: 2771
Joined: Tue Nov 08, 2016 10:18 am

Re: Qubo Digital Smart B+ sync with Garmin 935.

Postby Elite Admin S » Wed Mar 28, 2018 10:27 am

If you use a non Elite device/app to connect your Qubo Digital, you have to set in it a circumference value equal to the roller circumference (well, half roller, as it has two magnets inside). So, in your Garmin, set a circumference value of 47mm and speed should be correct.

Please notice that not all the devices allow to insert a so low circumference value!
Contact Garmin for any additional information

Regards

chiara.santambrogio74
Posts: 1
Joined: Tue Feb 01, 2022 12:01 pm

Re: Qubo Digital Smart B+ sync with Garmin 935.

Postby chiara.santambrogio74 » Tue Feb 01, 2022 12:02 pm

Hi, may I know the same information (measure to put in Garmin) for Elite Turno?
Thank you in advance

User avatar
Elite Admin S
Posts: 2771
Joined: Tue Nov 08, 2016 10:18 am

Re: Qubo Digital Smart B+ sync with Garmin 935.

Postby Elite Admin S » Tue Feb 01, 2022 1:26 pm

Hi

If you connect the trainer as speed&cadence sensor + power sensor, you have to insert your wheel circumference divided by 15.34
For example: 2095/15.34 = 137 mm

Regards


Return to “Qubo Digital / Novo Smart”

Who is online

Users browsing this forum: No registered users and 5 guests