Elite Direto Firmware and Turn off

Drivo, Rampa, RealTour, RealAxiom, RealPower, Real Turbo Muin, Qubo Digital Smart B+

Moderators: Elite Admin S, Elite Admin M

jose84
Posts: 5
Joined: Fri Oct 20, 2017 11:10 pm

Elite Direto Firmware and Turn off

Postby jose84 » Fri Oct 20, 2017 11:13 pm

Hello
I just recieved my new Direto and maybe I have two stupid questions:
1. No where in the documentation I found anything about something simple as Turn off, It says goes to "Sleep mode" but nothing else, is just a simple unplug from the electrical/enery wall plug?
2. How I can check that I have the latest version of firmware on my trainer?
Thanks
J.

User avatar
Elite Admin S
Posts: 492
Joined: Tue Nov 08, 2016 10:18 am

Re: Elite Direto Firmware and Turn off

Postby Elite Admin S » Tue Oct 24, 2017 11:34 am

Hi

Direto doesn't have a switch to turn it off. You can decide if wait the stand-by mode or unplug it (best solution to avoid storm damages).
About the firmware, by now there is only one firmware for Direto so... you have the last one! ;)

By the way, in the future we will release an app that will check the firmware status of the trainer and eventually upgrade it.

Regards

jose84
Posts: 5
Joined: Fri Oct 20, 2017 11:10 pm

Re: Elite Direto Firmware and Turn off

Postby jose84 » Tue Oct 24, 2017 2:01 pm

Hello
Many thanks for the reply, actually I fond out that the Direto after a while of no use will shutdown itself. Also, thanks for the info about the firmware.
Now, I got another issue, I have my Garmin Edge 810 and I would like to pair manually the Direto since I got another Power meter next to it, where I can find this ID?
Thanks
J.

User avatar
Elite Admin S
Posts: 492
Joined: Tue Nov 08, 2016 10:18 am

Re: Elite Direto Firmware and Turn off

Postby Elite Admin S » Thu Oct 26, 2017 10:44 am

Hi J.

Garmin Edge 810 doesn't support the fe-c trainers. You can connect to it only as a speed&cadence sensor + power sensor.
I don't know if this is the information you need.

Regards

jose84
Posts: 5
Joined: Fri Oct 20, 2017 11:10 pm

Re: Elite Direto Firmware and Turn off

Postby jose84 » Thu Oct 26, 2017 10:50 am

Hello
I found the ID for connecting manually to my Garmin 810, you need to take the cover of the leds and you'll dine the ID tag.
Thanks!


Return to “Interactive Trainers”

Who is online

Users browsing this forum: No registered users and 2 guests