Issue fitting my bike - between <28" and > 28"

Drivo, Rampa, RealTour, RealAxiom, RealPower, Real Turbo Muin, Qubo Digital Smart B+

Moderators: Elite Admin S, Elite Admin M

punky
Posts: 2
Joined: Thu Nov 19, 2020 2:21 pm

Issue fitting my bike - between <28" and > 28"

Postby punky » Tue Dec 22, 2020 10:01 pm

Hi all,

I have a Elite Tuo and my bike is a hybrid with a 700c with 35c trainer tyre.

Following DC Rainmaker's instructions I tried the <28" installations but as far back as the trainer would go, it was too tight for the wheel (i.e. the roller should be lightly skimming the wheel before clamping).

I then tried the > 28" installation. At first I managed to get my bike in OK, but after like 30 mins when I tried calibrating it, I couldn't get the roller close enough.

Which installation method should I be using and does anyone have any tips for getting my bike in properly?

Thanks.

okhomenko
Posts: 1
Joined: Mon Dec 28, 2020 6:05 pm

Re: Issue fitting my bike - between <28" and > 28"

Postby okhomenko » Mon Dec 28, 2020 6:11 pm

I am having exactly the same tires and same issue. I initially installed >28" because it was default instruction and I had no idea about size of my tires :D

It worked pretty well, on hard sessions, standing position etc. Although I couldn't get calibration working

Today I changed position to <28 and calibration finished fine, although I haven't tried to do my workout yet.

punky
Posts: 2
Joined: Thu Nov 19, 2020 2:21 pm

Re: Issue fitting my bike - between <28" and > 28"

Postby punky » Sat Jan 09, 2021 2:08 pm

Thanks!

How did you manage to get the roller back far enough? I can't seem to get it back far enough to get the trainer clamped to the frame?


Return to “Interactive Trainers”

Who is online

Users browsing this forum: Bing [Bot] and 1 guest