Turbo Muin Knocking noise

Non interactive/smart trainers and old trainers

Moderators: Elite Admin S, Elite Admin M

vincenzo.iaciofano
Posts: 3
Joined: Mon Oct 14, 2019 11:27 pm

Turbo Muin Knocking noise

Postby vincenzo.iaciofano » Mon Oct 14, 2019 11:32 pm

Hi, I hope you can help me. I bought a elite turbo muin less than two years ago thinking that i would have many years trouble free. Its started to make knocking noises. I can also feel vibration as I let the trainer free wheel. I assume its a bearing that has gone or could it be adjustment? I am looking for the original instructions or book to show how to adjust first? Hopefully this will cure the noise.

Vincenzo
(vinnychoff}

vincenzo.iaciofano
Posts: 3
Joined: Mon Oct 14, 2019 11:27 pm

Re: Turbo Muin Knocking noise

Postby vincenzo.iaciofano » Sat Oct 19, 2019 5:42 pm

Hi, I took it apart and have found that two sets of bearings have failed. The adjuster bearing has worn out and the main bearing on the shaft in the fluid. Is this normal after two years of service?

Regards Vincenzo

klett.markus
Posts: 1
Joined: Thu Oct 08, 2020 7:55 pm

Re: Turbo Muin Knocking noise

Postby klett.markus » Tue May 04, 2021 6:40 pm

Hello, I have the same problem. I have to change the bearings and fluid. I saw some youtube videos. I think to get the bearings isn't a problem, but the fluid. I don't know what kind of fluid and how much must be filled in. Can anybody help me? Thank you in advance Markus.

User avatar
Elite Admin S
Posts: 2426
Joined: Tue Nov 08, 2016 10:18 am

Re: Turbo Muin Knocking noise

Postby Elite Admin S » Wed May 05, 2021 9:45 am

@klett.markus,

it's a special oil, you cannot using a different one.
Please contact our customer care:
https://support.elite-it.com

Regards

RoyStultz
Posts: 1
Joined: Sat Sep 25, 2021 12:48 pm

Re: Turbo Muin Knocking noise

Postby RoyStultz » Tue Sep 28, 2021 3:49 pm

How do you overcome this issue? As a new user, I would like to know more about it. Thank you!


Return to “Other Trainers”

Who is online

Users browsing this forum: No registered users and 2 guests