Search found 48 matches

by raphnou
Wed Mar 25, 2020 6:24 pm
Forum: Direto, Direto X, Direto XR
Topic: Calibration failed
Replies: 2
Views: 4782

Re: Calibration failed

Bonjour, J'avais un Direto il y a 2 ans, la courroie a cassé, et j'avais aussi les problèmes d'étalonnages. Je constate que c'est toujours pareil à lire le forum de temps en temps Ce direto a une mauvaise conception, il ne sera pas fiable sur le long terme, j'ai préféré voir ailleurs, et maintenant ...
by raphnou
Sat Dec 14, 2019 2:53 pm
Forum: Direto, Direto X, Direto XR
Topic: direto erg mode in zwift
Replies: 26
Views: 54710

Re: direto erg mode in zwift

After I bought Directo II new and use with AppleTV/Zwift in ERG mode it worked (was a bit slow like 10 seconds) but worked fine. But, over time ERG got slow and slower and now doesn't work at all. What can I do to 'reset' the Directo and/or apply firmware patch to fix the ERG problem on the Directo...
by raphnou
Tue Jul 31, 2018 7:36 am
Forum: Trainers general discussion
Topic: Direto Response Time
Replies: 2
Views: 6512

Re: Direto Response Time

Hello, Unfortunately a home trainer is used mainly with Zwift or Trainerroad, for example in Zwift the new plans are not modifiable nor adaptable to the latency of the Direto, with very short fractions of some excercices, the Direto does not allow to validate the 'excercise. For me the Direto is goo...
by raphnou
Sat Jul 07, 2018 7:41 am
Forum: Direto, Direto X, Direto XR
Topic: Elite Direto - no resistance and strange clicking noise
Replies: 13
Views: 25857

Re: Elite Direto - no resistance and strange clicking noise

Hello, I went on the side of the dark force and my feeling is that I did very well. The reliability of the Direto does not seem to me to the height for 4 training per week, the design of the belt tensioning roller is its weak point, the bearing is too small, sooner or later everyone will have these ...
by raphnou
Fri Jun 08, 2018 12:50 pm
Forum: Direto, Direto X, Direto XR
Topic: Elite Direto - no resistance and strange clicking noise
Replies: 13
Views: 25857

Re: Elite Direto - no resistance and strange clicking noise

Alas the Direto is gone today! :cry: But now I understand why the calibration drifted down every week and the popping noises. The damaged belt loses its resistance to the rhythm of the sessions and the calibration was always on the decline. The Assitance Elite, so offered me to adjust the belt, but ...
by raphnou
Thu Jun 07, 2018 7:23 pm
Forum: Direto, Direto X, Direto XR
Topic: Elite Direto - no resistance and strange clicking noise
Replies: 13
Views: 25857

Re: Elite Direto - no resistance and strange clicking noise

Hello Elite, I bought the Direto the 12/04/18 I use it 4 times a week. I just finished a long session of 1h30 on Zwift, at the end of the session the Direto made noises of "clack" several times and now it is hard all the time, the pedaling is not at all fluid it is jerky, and the direto no...
by raphnou
Tue Jun 05, 2018 7:42 am
Forum: My e-training
Topic: intervals with MyETraining training mode
Replies: 1
Views: 4987

intervals with MyETraining training mode

Hello Elite, For what reason does MET in training mode still not allow to mark the intervals automatically? Zwift does it, garmin does it, when we do a training the goal is still to be able to analyze each interval separately, MET systematically export a TCX file with a single interval ... Have a go...
by raphnou
Mon Jun 04, 2018 5:52 pm
Forum: Direto, Direto X, Direto XR
Topic: Direto power off by around 50 watts
Replies: 74
Views: 2385487

Re: Direto power off by around 50 watts

We check the tension of the belt unit by unit here in our factory. But it may happen - especially with time - that the belt loose a little bit of power, due to usage. This will cause a drop in the offset value. In your case, I don't think this is the problem (it's not possible that the belt is loos...
by raphnou
Mon Jun 04, 2018 4:37 pm
Forum: Direto, Direto X, Direto XR
Topic: Latency of the direto in ERG mode with Zwift
Replies: 8
Views: 15394

Re: Latency of the direto in ERG mode with Zwift

Hi Direto adjusts resistance using a stepping motor. When requested power/slope changes, the motor moves a magnetic arm to match the requested value. Of course this movement requires some seconds. Also, the software will add other seconds of delay (it has to verify the data, see the variation, send...
by raphnou
Fri Jun 01, 2018 3:58 pm
Forum: Direto, Direto X, Direto XR
Topic: Latency of the direto in ERG mode with Zwift
Replies: 8
Views: 15394

Re: Latency of the direto in ERG mode with Zwift

Hi, I repeat my graph above, to add a precision. I took the selection # 1 which corresponds to the points in the Direto precision range which is +/- 2.5% or according to the requested power 210w. The range of points is between 204.75w - 215.25w First observation, the average power of the selection #...

Go to advanced search